FEATURES / BENEFITS
Nominal sizes are available from 018 through 060 to meet the needs of residential and light commercial applications.
All models are listed with UL, (U.S. and Canada), AHRI, and CEC.
Units offered in single phase 208/230v are 018-060, and three phase 208/230v in 036, 048 and 060.
The totally enclosed fan motor provides greater reliability under adverse conditions and dependable performance for many years. The permanent split capacitor type motor was designed for optimum efficiency. The motor was then qualified under extreme conditions to help ensure a long, reliable life.
A weather protective cabinet of prepainted steel is protected underneath by a galvanized coating and treated with a layer of zinc phosphate for a finish that will last for many years. All screws on cabinet exterior are coated for a long-lasting, rust-resistant, quality appearance.
The copper tube, enhanced sine wave, aluminum fin coil is designed for optimum heat transfer. Vertical air discharge carries sound and hot condenser air up and away from adjacent patio areas and foliage. The base pan is designed for easy removal of water, dirt, and leaves.
Each compressor is protected with internal temperature and current-sensitive overloads. An internal pressure relief valve provides high pressure protection to the refrigerant system. For improved serviceability, all models are equipped with a compressor terminal plug.
Both service valves are brass, front seating type with sweat connections. Valves are externally located so refrigerant tube connections can be made quickly and easily. Each valve has a service port for ease of checking operating refrigerant pressures.
One access panel provides access to electrical controls. Removal of top gives access to fan motor, compressor, and condenser coil.
|Weight||195 Pounds (lbs)|
|Width||31.1875 Inches (In)|
|Height||28.25 Inches (In)|
|Country of Origin||MEX|
|UPC or Barcode||1PPA13NA0600NG|
|EPA Cert Required||No|
|Length||31.1875 Inches (In)|
|Condenser Motor HP||1/4 HP|
|Cooling Rated Capacity Btu/h||60000|
|Full Load Amps||1.4|
|Liquid Line Fitting||Sweat|
|Liquid Line Size||3/8"|
|Locked Rotor Amps||125|
|Maximum Fuse Size||50|
|Maximum Piping Length||80'|
|Minimum Circuit Amps||29|
|Number of Fan Blades||1|
|Rated Load Amps||22.1|
|Sound Level (dBA)||79|
|Suction Line Fitting||Sweat|
|Suction Line Size||1 1/8"|