Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
#

Payne® - 5 Ton, 13 SEER, Residential Heat Pump Condensing Unit (Dry R-22) Dense Grille

Item: PH13NR06000G
MFR: PH13NR06000G

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
Equipment part list is available.
What’s the price?
Sign in for pricing.
Decrease quantity
Increase quantity

Description

Units factory-shipped with no refrigerant. Dry nitrogen charge only.

PERFORMANCE:
All models are verified for efficiency and capacity by AHRI.

ELECTRICAL RANGE:
All units are offered in 208/230--1, single phase, with 208/230-3 three phase offered in models 048-060.

FAN MOTOR:
The totally enclosed fan motor provides greater reliability under adverse conditions and dependable performance for many years. The permanent split capacitor type motor was designed for optimum efficiency. The motor was then qualified under extreme conditions to help ensure a long, reliable life.

CABINET:
A weather protective cabinet of prepainted steel is protected underneath by a galvanized coating and treated with a layer of zinc phosphate for a finish that will last for many years. All screws on cabinet exterior are coated for a long--lasting, rust--resistant, quality appearance.

UNIT DESIGN:
The copper tube, enhanced sine wave, aluminum fin coil is designed for optimum heat transfer. Vertical air discharge carries sound and condenser air up and away from adjacent patio areas and foliage. The base pan is designed for easy removal of water, dirt, and leaves.

DEFROST CONTROL BOARD:
Incorporates defrost relay, defrost timer, and low voltage terminations. The defrost control is a time/temperature initiation/termination control which includes three field-selectable time periods of 30, 60 and 90 minutes.

COMPRESSOR:
Each compressor is protected with internal temperature-and current--sensitive overloads. An internal pressure relief valve provides high pressure protection to the refrigerant system. For improved serviceability, all models are equipped with a compressor terminal plug.

SERVICE VALVES:
Both service valves are brass, front seating type with sweat connections. Valves are externally located so refrigerant tube connections can be made quickly and easily. Each valve has a service port for ease of checking operating refrigerant pressures.

SERVICEABILITY:
One access panel provides access to electrical controls. Removal of top gives access to fan motor, compressor, and condenser coil.

Documentation

Specifications

Weight273 Pound (lb.)
Width31.1875 Inches (in)
Height42 Inches (in)
Country of OriginVar
UPC or Barcode1PPH13NR06000G
Hazardous MaterialNo
EPA Cert RequiredNo
Length31.1875 Inches (in)
BrandPayne
CFM3400
CompressorScroll
Condenser Motor HP1/4 HP
Condenser Motor RPM1100
Cycle/Hertz60
Energy Star RatedNo
Equipment TypeHeat Pump
ETL CertifiedNo
ETL ListedNo
Full Load Amps1.4
High Pressure LimitsYes
ISO CodeVaries
Liquid Line Size1.125
Locked Rotor Amps150
Maximum Fuse Size50
Maximum Piping Length250'
Metering DeviceTXV
Minimum Circuit Amps32.7
Motor TypePSC
Number of Fan Blades1
PhaseSingle
Product FamilyPH13N
Rated Load Amps13.7
RefrigerantR-22
SEER13
Sound Level (dBA)80
StageSingle
Suction Line Size1 1/8
TierBase
Tonnage5
UL ListedNo
UL RecognizedNo
Voltage208-230 VAC

Equipment Part List

Loading...
Shop Honeywell products