Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
#

Fieldpiece Instruments - SDMN6 - Dual pressure manometer/draft simulator

Item: SDMN6
MFR: SDMN6

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
Equipment part list is available.
What’s the price?
Sign in for pricing.
Decrease quantity
Increase quantity

Description

The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or if it is starting to fail which can cause the furnace to run in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers' specification, so there's no need to carry a large variety of pressure switches on your truck.

The Dual Port Manometer has the ranges to measure gas pressure and the resolution needed to measure static pressure. Ideal for HVACR field service technicians, the SDMN6 can determine if the gas pressure coming into the house or out of the regulator are correct. The SDMN6 measures gas pressure up to 60" water column (WC) with a resolution of 0.1" WC. In addition, the unit measures both positive and negative pressure, which is used for measurement on vacuum control lines. The unit will take differential pressure readings and display the difference between P1 and P2 at all times in the lower right corner of the easy-to-read LCD. Four different measurement scales can be used: inches of water column, millimeters of water column, mBar, and PSI.

The SDMN6 also has a zero adjust to zero out the meter in different ambient pressures. It has a hold button to hold the currently displayed reading. The auto-power-off function conserves battery life, but can be disabled if desired.
In the static pressure mode, the unit can measure up to 2"WC with resolution to 0.010"WC, which enables a technician to measure small differences in air (or static) pressure.

Specifications

Weight1.8 Pound (lb.)
Width6.5 Inches (in)
Height11.75 Inches (in)
Country of OriginTWN
UPC or Barcode872641003005
Hazardous MaterialNo
EPA Cert RequiredNo
Length3 Inches (in)
Accuracy0 to 50°C (32 to122°F)
Auto Power OffYes
BrandFieldpiece
DisplayDigital
IncludesANC1 - Four Pocket Carrying Case, ASP2s - Static Pressure Probes, RMA316 - Pressure Tubes, Quick Connect Leads, Hoses and Y-splitter, Hoses with Brass Screw Fittings
Includes CaseYes
ISO CodeTW
Low Battery IndicatorYes
Operating Temperature Range32°F to 118°F (0°C to 47.7°C)
TypeManometers
Warranty OfferedThis meter is warranted against defects in

Equipment Part List

Loading...
Shop Honeywell products