Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
#

Payne® Ductless 24,000 Btu Cooling Condenser Single Zone 208/230-1 (Matches PW3 High Wall)

Item: PA13NAM24000
MFR: PA13NAM24000

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
Equipment part list is available.
What’s the price?
Sign in for pricing.
Decrease quantity
Increase quantity

Description

The ideal compliment to your ducted system when it is impractical or prohibitively expensive to use ductwork.

FEATURES / BENEFITS
AN INEXPENSIVE AND CREATIVE SOLUTION TO DESIGN PROBLEMS.
The PA(H)13 / PW3 series duct-free split systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit connected only by refrigerant tubing and wires.
The fan coil is mounted on the wall, near the ceiling. This selection of fan coils permits inexpensive and creative solutions to design problems such as:
  • Add-ons to current space (an office or family room addition)
  • Special space requirements
  • When changes in the load cannot be handled by the existing system.
  • When adding air conditioning to spaces that are heated by hydronic or electric heat and have no ductwork.
  • Historical renovations or any application where preserving the look of the original structure is essential.
These compact indoor fan coil units take up very little space in the room and do not obstruct windows. The fan coils are attractively styled to blend with most room decors. Advanced system components incorporate innovative technology to provide reliable cooling performance at low sound levels.
LOW SOUND LEVELS
When noise is a concern, the duct-free split systems are the answer. The indoor units are whisper quiet. There are no compressors indoors, either in the conditioned space or directly over it, and there is none of the noise usually generated by air being forced through ductwork.
When sound ordinances and proximity to neighbors demand quiet operation, the PA(H)13 unit is the right choice: The advanced, horizontal airflow design distributes air more evenly over the coil.
SECURE OPERATION
If security is an issue, outdoor and indoor units are connected only by refrigerant piping and wiring to prevent intruders from crawling through ductwork. In addition, since PA(H)13 units can be installed close to an outside wall, coils are protected from vandals and severe weather.
FAST INSTALLATION
This compact duct-free split system is simple to install. A mounting bracket is standard with the indoor units and only wire and piping need to be run between indoor and outdoor units. These units are fast and easy to install ensuring minimal disruption to customers in the home or workplace. This makes the PA13NA(N)/PW3CA(N), PH13A(N)/PW3HA(N) duct-free splitsystems the equipment of choice, especially in retrofit situations.
SIMPLE SERVICING AND MAINTENANCE
Removing the top panel on outdoor units provides immediate access to the control compartment, providing a service technician access to check unit operation. In addition, the draw-thru design of the outdoor section means that dirt accumulates on the outside surface of the coil. Coils can be cleaned quickly from the inside using a pressure hose and detergent.
On all indoor units, service and maintenance expense is reduced due to easy-to-use cleanable filters. In addition, these high wall systems have extensive self-diagnostics to assist in troubleshooting.
BUILT-IN RELIABILITY
Duct-free split system indoor and outdoor units are designed to provide years of trouble-free operation.
The high wall indoor units include protection against freeze-up and high evaporator temperatures on heat pumps.
The condensing units and heat pumps are also protected. There is a three minute time delay before the compressor will start. The compressor is also protected by the over-current protection. On size 18k and 24k heat pumps, there is high temperature protection.
INDIVIDUAL ROOM COMFORT
Maximum comfort is provided because each space can be controlled individually based on usage pattern. The air sweep feature provided permits optimal room air mixing to eliminate hot and cold spots for occupant comfort. In addition, year-round comfort can be provided with heat pumps.
ECONOMICAL OPERATION
The duct-free split system design allows individual room heating or cooling when required. There is no need to run large supply-air fans or chilled water pumps to handle a few spaces with unique load patterns. In addition, because air is moved only in the space required, no energy is wasted moving air through ducts.
EASY-TO-USE CONTROLS
The high-wall units have microprocessor-based controls to provided the ultimate in comfort and efficiency. The user friendly wireless remote control provides the interface between user and the unit.
ACCESSORIES
Customizing these duct-free split systems to your application is easily accomplished.
Adding a condensate pump accessory to the high wall fan coil provides installation flexibility.
AGENCY LISTINGS
All systems are listed with ARI (Air Conditioning & Refrigeration Institute), and ETL.

Documentation

Specifications

Weight149.6 Pound (lb.)
Width35 Inches (in)
Height33.5 Inches (in)
Country of OriginVar
UPC or Barcode1PPA13NAM24000
Hazardous MaterialNo
EPA Cert RequiredNo
Length23.11 Inches (in)
BrandPayne
CompressorRotary
Condenser Motor HP0.218
Condenser Motor RPM740
Condenser Motor Watts100
Cooling Capacity1600
Cycle/Hertz60
Energy Star RatedNo
Equipment TypeDuctless Outdoor
ETL CertifiedNo
ETL ListedYes
Full Load Amps0.62
ISO CodeVaries
Liquid Line Size3/8"
Locked Rotor Amps34.8
Maximum Fuse Size25
Maximum Piping Length100'
Metering DeviceCapillary Tube
Minimum Circuit Amps14
Motor TypeRotary
Number of Fan Blades3
Number of HVAC Zones1
PhaseSingle
Product FamilyPA13NA
Rated Load Amps9.7
RefrigerantR-410a
Rows3
SEER13
Sound Level (dBA)67
Suction Line Size5/8"
TierBase
Tonnage2
UL ListedNo
UL RecognizedNo
Voltage208-230 VAC
Watts100

Equipment Part List

Loading...
Shop Honeywell products