Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
Mystery Inventory Blowout

Carrier® Comort™ - 3 Ton 14 SEER 90000 Btuh Residential Packaged Hybrid Heat® Unit

Item: 48VT-B360903-TP
MFR: 48VT-B360903-TP

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

Frequently Bought Together

Best Sellers

Pads Mounts & Blocks

Disconnects & Whips

Thermostats

Refrigerant & Oils

About This Product

Product Info

Description

Options
FE - Economizer (3 Phase Only)
GP - Base unit with tin plated indoor coil hairpins and Stainless Steel HX (Single Phase Only)
GS - Stainless Steel HX
SE - Economizer and Stainless Steel HX (3 Phase Only)
TF - Filter Rack
TP - Base unit with tin plated indoor coil hairpins (Single Phase Only)
Only used if ordering an option

Single-Packaged Products with Energy-Saving Features and Puron® refrigerant.
  • Up to 14.5 SEER
  • 12.0 EER
  • 8.0 HSPF
  • 81.0% AFUE (Single phase models)
  • Factory-Installed TXV
  • ECM Motor-Standard
  • Direct Spark Ignition
  • Dehumidification Feature
FEATURES / BENEFITS
One-piece heating and cooling units with low sound levels, easy installation, low maintenance, and dependable performance.
Puron is Carrier’s unique refrigerant designed to help protect the environment. Puron is an HFC refrigerant which does not contain chlorine that can harm the ozone layer. Puron refrigerant is in service in millions of systems, proving highly reliable, environmentally sound performance.
Easy Installation
Factory-assembled package is a compact, fully self-contained, combination gas heating/electric heating and cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard and optional heating/ cooling size combinations with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging.
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER (Seasonal Energy Efficiency Ratios) of up to 14.5, HSPF of 8.0 and AFUE (Annual Fuel Utilization Efficiency) ratings 81.0% on single phase models, and up to 80.4% on three phase models.
Energy-saving, direct spark ignition saves gas by operating only when the room thermostat calls for heating. Standard units are furnished with natural gas controls. A low-cost field installed kit for propane conversion is available for all units.
Low NOx units are designed for California installations. These models meet the California maximum oxides of nitrogen (NOx) emissions requirement of 40 nanograms/joule or less as shipped from the factory and MUST be installed in California Air Quality Management Districts and wherever a Low NOx rule exists.
Durable, dependable components Compressors are designed for high efficiency. Each compressor is hermetically sealed against contamination to help promote longer life and dependable operation. Each compressor also has vibration isolation to provide quieter operation. All compressors have internal high pressure and overcurrent protection.
Monoport inshot burners produce precise air-to-gas mixture, which provides for clean and efficient combustion. The large monoport on the inshot (or injection type) burners seldom, if ever, requires cleaning. All gas furnace components are accessible in one compartment.
Turbo-tubular™ heat exchangers are constructed of aluminized steel for corrosion resistance and optimum heat transfer for improved efficiency. The tubular design permits hot gases to make multiple passes across the path of the supply air. In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive, PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooling operation down to 40°F (4.4°C) outdoor temperature. Motormaster® II low ambient kit is available as a field installed accessory.
Thermostat Controls
In order to take full advantage of the features afforded by your HYBRID HEAT® (dual-fuel) product, you need to install the Edge® Thermidistatt Control in either its programmable (part # TP-PRH) or non-programmable (TP-NRH) models.
Thermostatic Expansion Valve - A hard shutoff, balance port TXV maintains a constant superheat at the evaporator exit (cooling cycle) resulting in higher overall system efficiency.
Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with a full refrigerant charge. Refrigerant service connections make checking operating pressures easier.
High and Low Pressure Switches provide added reliability for the compressor.
Indoor and Outdoor coils are computer-designed for optimum heat transfer and efficiency. The indoor coil is fabricated from copper tube and aluminum fins and is located inside the unit for protection against damage. The outdoor coil is internally mounted on the top tier of the unit.
Low sound ratings ensure a quiet indoor and outdoor environment with sound ratings as low as 73 dBA.
Easy to service cabinets provide easy multiple panel accessibility to serviceable components during maintenance and installation. The base with integrated drain pan provides easy ground level installation with a mounting pad. A nesting feature ensures a positive basepan to roof curb seal when the unit is roof mounted. A convenient 3/4-in. (19 mm) wide perimeter flange makes frame mounting on a rooftop easy.
Standard horizontal metal duct covers with insulation come with the unit and cover the horizontal duct openings. These can be left in place if the units are converted to downflow.
Integrated Gas Control (IGC) board provides safe and efficient control of heating and simplifies trouble-shooting through its built-in diagnostic function.
Cabinets are constructed of heavyduty, phosphated, zinc-coated prepainted steel capable of withstanding 500 hours in salt spray. Interior surfaces of the evaporator/heat exchanger compartment are insulated with cleanable semi-rigid insulation board, which keeps the conditioned air from being affected by the outdoor ambient temperature and provides improved indoor air quality. (Conforms to American Society of Heating, Refrigeration and Air Conditioning Engineers No. 62P.) The sloped drain pan minimizes standing water in the drain. An external drain is provided.
Short-Cycling protection for the compressor is incorporated into our defrost control board ensuring a five minute delay (+/-2 minutes) before restarting compressor after shutdown for any reason.

Specifications

Weight440 Pounds (lbs)
Width44.125 Inches (In)
Height44.75 Inches (In)
Country of OriginMEX
Length48.1875 Inches (In)
AFUE81%
Air FlowConvertible
Blower Motor HP3/4 HP
Blower Motor TypeECM
Blower Wheel11" x 10"
BrandCarrier
BTU Input90000
BTU Output74000
CFM Cooling1200
CompressorScroll
Condenser Motor HP1/5 HP
Condenser Motor RPM810
Condenser Motor TypePSC
Cooling Capacity35800
Cooling Rated Capacity Btu/h36000
COP3.5
Cycle/Hertz60
Drain Connection Size0.25
EER12-13.5
Energy Star RatedNo
ETL CertifiedNo
ETL ListedNo
Filter Size24" x 30" x 1"
Full Load Amps1.2
Gas Heating Capacity74000
Heat Exchanger TypeTubular
Heating Capacity74000
High Pressure LimitsYes
HSPF8
IEER0
Ignition TypeDirect Spark
ISO CodeMX
Locked Rotor Amps79
Maximum Fuse Size40
Metering DeviceTXV
Minimum Circuit Amps28.6
Nominal EER12
Number of Fan Blades1
PhaseSingle
Product Family48VT-B
Rated Load Amps17.1
RefrigerantR-410a
SEER14
Sound Level (dBA)74
StageTwo
TierComfort™
Tonnage3
UL ListedYes
UL RecognizedNo
Voltage208-230 VAC

Documents

Equipment Part List

Loading...
*Valid thru September 30, 2018 at participating locations only. All discounts reflected in current pricing. Select items only. Excludes special pricing. Offer cannot be combined with other offers or programs. While supplies last. No rainchecks allowed. Not valid on previous purchases. Management reserves the right to modify or end this promotion at any time. Call your local sales center for details.
hilmor Trades Month Save 10%