Your browser is not supported. For the best experience, you should upgrade to a modern browser with improved speed and security.
Got a question...Click Chat With Us in the bottom right corner of your screen.

Bundle - CML - Carrier® WeatherMaker™ Rooftop Gas Heat/Electric Cool


Included In This Bundle

  • System Sensor - RTS2-AOS Multi-Signaling Accessory with Strobe for Duct Smoke Detectors
    Item: SS-RTS2-AOS
    Quantity: 1
  • System Sensor - D4120 4-Wire Photoelectric Duct Smoke Detector
    Item: SS-D4120
    MFR: D4120
    Quantity: 1
  • System Sensor - DST5 - 5' Sampling Tube
    Item: SS-DST5
    MFR: DST5
    Quantity: 1
  • Carrier® WeatherMaker™ - 6 Ton Packaged Rooftop Gas Heat & Electric Cool Unit Med Heat (208/230-3-60)
    Item: 48TCEA07A2A5-0A0A0
    MFR: 48TCEA07A2A5-0A0A0
    Quantity: 1
  • Carrier® - EDGE® Pro Programmable Commercial Thermostat
    Item: 33CS2PP2S-03
    MFR: 33CS2PP2S-03
    Quantity: 1

* Required Fields

Store Inventory

Sign in to see real-time inventory at the stores closest to you.
What’s the price?
Sign in for pricing.

About This Product

Product Info


Bundle - CML - Carrier® WeatherMaker™ Rooftop Gas Heat/Electric Cool
  • 48TCEA07A2A5-0A0A0 Carrier® WeatherMaker™ - 6 Ton Packaged Rooftop Gas Heat & Electric Cool Unit Med Heat (208/230-3-60)
  • 33CS2PP2S Carrier® EDGE® Pro Programmable Commercial Thermostat
  • D4120 System Sensor 4-Wire Photoelectric Duct Smoke Detector
  • RTS2-AOS System Sensor Multi-Signaling Accessory with Strobe for Duct Smoke Detectors
  • DST5 System Sensor 5' Sampling Tube
Warning: this product contains a chemical known to the State of California to cause cancer.


Prop 65Yes



Bundle Components

System Sensor - RTS2-AOS Multi-Signaling Accessory with Strobe for Duct Smoke Detectors



System Sensor - RTS2-AOS is a multi-signaling accessory designed to work with 4-wire conventional duct smoke detectors.


Weight0.8 Pounds (lbs)
Width4.8 Inches (In)
Height5.3 Inches (In)
Country of OriginMEX
Length1.6 Inches (In)
ApplicationDuct Smoke Detection
ApprovalsUL, FM, CSFM
Audible AlertYes
BrandSystem Sensor
For Use WithDuct Smoke Detectors
Maximum Voltage20 to 29 VDC
MountingWall Mount
Operating Temperature14°F to 140°F (-10°C to 60°C)
Operating Temperature Range14°F to 140°F (-10°C to 60°C)
Power SourceDC
Prop 65Yes
StandardsUL, FM, CSFM
Terminal ConnectionYes
Test ButtonYes
TypeRemote Test Station
UL ListedYes
Visual AlertYes
Voltage20-29 VDC
Wire Gauge14-22 AWG

System Sensor - D4120 4-Wire Photoelectric Duct Smoke Detector

Item: SS-D4120


System Sensor - The D4120 4-wire photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints and mounts to round or rectangular ductwork. This unit senses smoke in the most challenging conditions, operating in airflow speeds of 100 to 4,000 feet per minute, temperatures of -4°F to 158°F, and a humidity range of 0 to 95% (noncondensing). A plug-in sensor head offers improved false alarm immunity and simple installation, testing, and maintenance. An improved cover design isolates the sensor head from the low-flow feature for simple maintenance.


Weight3.3 Pounds (lbs)
Width5 Inches (In)
Height2.5 Inches (In)
Country of OriginMEX
Length14.38 Inches (In)
ApplicationDuct Smoke Detection
ApprovalsUL, ULC, FM, CSFM
Audible AlertNo
Batteries IncludedNo
Batteries RequiredNo
Battery BackupNo
BrandSystem Sensor
Connection TypeTerminal Block
Contact RatingAlarm initiation contacts (SPST) 2.0A @ 30 VDC (resistive)Alarm auxiliary contatcs (DPDT) 10A @30 VDC (resistive)10A @250 VAC (resistive)1/2 HP @240 VAC1/4 HP @120 VACNOTE: Alarm auxiliary contacts shall not be connected to initiating circuits ofcontrol p
CUL ListedNo
Cycle/Hertz50/60 Hz
Detection MethodPhotoelectric
Hush ButtonNo
Interconnection Capability50
Locking PinNo
Maximum Voltage120 VAC/24 VDC
MountingSide by Side or Top over Bottom
Operating Temperature-4°F to 158°F (-20°C to 70°C)
Operating Temperature Range-4°F to 158°F (-20°C to 70°C)
Power SourceDC
Prop 65Yes
Sensor TypePhotoelectric
StandardsUL, FM, CSFM
Switch ActionDip Switches
Terminal ConnectionYes
Test ButtonYes
TypeDuct Smoke Detector
UL ListedYes
UL RecognizedNo
Visual AlertNo
Voltage120 VAC
Warranty OfferedYes
Wire GaugeUp to 12 AWG

System Sensor - DST5 - 5' Sampling Tube

Item: SS-DST5


System Sensor - Metal sampling tube for duct widths from 4' to 8' (1.2 to 2.4 m)


Weight1.7 Pounds (lbs)
Width0.5 Inches (In)
Height0.5 Inches (In)
Country of OriginMEX
Length60 Inches (In)
ApplicationDuct Smoke Detection
BrandSystem Sensor
For Use WithSmoke testing
MountingSnap-in from front or back of duct smoke detector
Operating Temperature-4°F to 158°F (-20°C to 70°C)
Prop 65Yes
StandardsUL, FM, CSFM
TypeAir Sampling Tube
UL ListedYes

Carrier® WeatherMaker™ - 6 Ton Packaged Rooftop Gas Heat & Electric Cool Unit Med Heat (208/230-3-60)

Item: 48TCEA07A2A5-0A0A0


= Gas Heat Packaged Rooftop
TC = WeatherMaker™ Standard Efficiency
E = Medium Heat
A = Standard One Stage Cooling Models
07 = 6 tons
A = None
2 = Belt Drive, Medium Static Option
A = Al/Cu - Al/Cu
5 = 208-230/3/60
0 = Electromechanical Controls can be used with W7212 EconoMi$er IV (Non-Fault Detection and Diagnostic)
A = None
0 = None
A = None
0 = Standard
* Contact your Carrier expert for additional information.

The Carrier rooftop unit (RTU) was designed by customers for customers. With “no-strip screw” collars, handled access panels, and more we’ve made your unit easy to install, easy to maintain and easy to use.
Easy to install:
All WeatherMaker® units are field-convertible to horizontal air flow which makes it easy to adjust to unexpected job site complications. Lighter units make easy replacement. Most Carrier 48TC rooftops fit on existing Carrier curbs dating back to 1989. Also, our large control box gives you room to work and room to mount Carrier accessory controls.
Easy to maintain:
Easy access handles by Carrier provide quick and easy access to all normally serviced components. Our “no-strip” screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal. Take accurate pressure readings by reading condenser pressure with panels on. Simply remove the black, composite plug, route your gauge line(s) through the hole, and connect them to the refrigeration service valve(s).
Easy to use:
The newly designed, central terminal board by Carrier puts all your connections and troubleshooting points in one convenient place, standard. Most low voltage connections are made to the same board and make it easy to find what you’re looking for and easy to access it. Carrier rooftops have high and low pressure switches, a filter drier, and 2-in (51mm) filters standard.

  • Single cooling stage models are available from 3 - 10 ton.
  • Two cooling stage models are available from 7.5 - 15 ton.
  • SEER up to 13.0 (up to 13.4 with ECM motor)
  • EER’s up to 11.1 (up to 11.4 with ECM motor)
  • IEER’s up to 11.8 with single speed indoor fan motor and up to 12.8 with 2-speed/VFD indoor fan motor.
  • Up to 28% lighter than similar industry units. Lighter rooftops make easier replacement jobs.
  • Utility connections are the same because 3 - 12.5 ton units fit on existing Carrier rooftop curbs. This saves time and money on replacement jobs.
  • Standardized components and layout. Standardized components and controls make service and stocking parts easier.
  • Scroll compressors on all units. This makes service, stocking parts, replacement, and troubleshooting easier.
  • Field convertible airflow (3 - 15 ton). Being able to convert a unit from vertical airflow to horizontal makes it easy to overcome job site complications. 15 ton models require a simple supply duct cover to field convert from factory vertical to horizontal.
  • Easy-adjust, belt-drive motor available.
  • Provisions for bottom or side condensate drain.
  • Capable of thru-the-base or thru-the-curb gas line routing.
  • Single-point gas / electrical connection.
  • Sloped, composite drain pan sheds water; and won’t rust.
  • Standardized controls & control box layout. Standardized components & controls make stocking parts & service easier.
  • Tool-less filter access door.
  • Clean, large, easy to use control box.
  • Color-coded wiring.
  • Large, laminated wiring and power wiring drawings which are affixed to unit make troubleshooting easy.
  • Single, central terminal board for test and wiring connections.
  • Fast-access, handled, panels for easy access on normally accessed service panels.
  • “No-strip” screw system guides screws into the panel & captures them tightly without stripping the screw, the panel, or the unit.
  • Mechanical cooling (115°F to 40°F or 46°C to 4°C) standard on all models. Winter Start Kit allows cooling operation down to 25°F (-4°C) and MotorMaster to -20°F (-29°C).
  • High efficiency, gas heat with induced-draft flue exhaust design.
  • Induced draft motor ensures no flue gas can escape into the indoor air stream.
  • Carrier designed naturally draining heat exchanger, unlike positive pressure heat exchangers, do not need to be periodically, manually drained. This saves labor and maintenance expense.
  • 2-in (51mm) disposable filters on all units.
  • Refrigerant filter-drier on each circuit.
  • Each circuit is protected with a high and low pressure switch.
  • Many factory-installed options ranging from air management economizers, 2 position dampers, plus convenience outlets, disconnect switches and smoke detectors.
  • Standard (parts only) Warranty: 10 yr. aluminized heat exchanger, 5 yr. compressor, 3 yr. Novation condenser coil, 1 yr. parts.
  • Factory-installed Humidi-MiZer® adaptive dehumidification system on all sizes with round tube / plate fin condenser coils, includes MotorMaster I controller.
  • NOTE: The last order date for 48TC 04-06 units with Humidi-MiZer is October, 12, 2015. Use KC, HC or LC models after the last order date.
  • Optional Staged Air Volume (SAV) system utilizes a Variable Frequency Drive (VFD) to automatically adjust the indoor fan motor speed between cooling stages. Available on 2-stage cooling models 08-16 with electromechanical controls or RTU Open.


Weight652 Pounds (lbs)
Width46.75 Inches (In)
Height41.375 Inches (In)
Country of OriginVar
Length74.375 Inches (In)
Air FlowHorizontal
Blower Motor HP1/4 HP
Blower Motor RPM1173-1518
Blower Motor Speeds1 (Single)
Blower Motor TypeFixed Torque
Blower Wheel10" x 10"
CertificationsAHRI Certified
Circuit Breaker - Max Amps50
Condenser Motor HP1/4 HP
Condenser Motor RPM1100
Condenser Motor TypeDirect Drive
Cooling Capacity70000
Cooling Rated Capacity Btu/h72000
Cycle/Hertz60 Hz
Drain Connection Size3/4"
Drive TypeBelt
Energy Star RatedYes
ETL ListedNo
Filter Size(4) 16" x 16" x 2"
Heat Exchanger TypeAluminized
Heating Capacity93000
Locked Rotor Amps136
Minimum Circuit Amps35
Product Family48TC
Prop 65Yes
Rated Load Amps19.6
Sound Level (dBA)78
Thermal Efficiency81%
UL ListedYes
UL RecognizedYes
Voltage208-230 VAC
Warranty OfferedYes

Carrier® - EDGE® Pro Programmable Commercial Thermostat

Item: 33CS2PP2S-03


Carrier's flexible 7-day, 5/2-day, or 1-day commercial programmable thermostats offer quality and reliability.

The wall-mounted, low-voltage thermostat maintains room temperature by controlling the operation of an HVAC (heating, cooling and ventilation) system. Separate heating and cooling set points and autochangeover capability allow occupied and unoccupied programming for energy savings.

Carrier's Edge® Pro commercial programmable thermostats offer:
  • sleek design with simplified two-wire installlation
  • 2-stage heat/2-stage cool with one stage auaxiliary heat (air conditioning, heat pump, and water source heat pump units)
  • humidity control capability (with 33CS2PPRH-03 thermostat only) integrates with Humidi-MiZer® dehumidification system
  • Hybrid Heat® dual fuel system compatible (33CS2PP2S-03-03)
  • proportional integral control of heating and cooling stages
  • compressor lockout in emergency heat mode for heat pumps
  • auxiliary heat lockout sensing for heat pumps (requires outdoor air sensor)
  • remote sensing and averaging with occupancy override<7-day, 5/2-day, or 1-day programmable or non-programmable
  • 4 or 2 periods per day selectable
  • UV light and filter service reminder
  • random start, smart recovery
  • dry contact enables economizer control


    Weight1.34 Pounds (lbs)
    Width5.25 Inches (In)
    Height3 Inches (In)
    Country of OriginUSA
    Length5.75 Inches (In)
    750mV CompatibleNo
    Accuracy± 2
    Ambient Temperature Range-4 to 158
    Auto ChangeoverYes
    Batteries IncludedNo
    Battery BackupNo
    Built In Wi-FiNo
    Change/Check RemindersYes
    Cycle/Hertz60 Hz
    Daylight Savings Time ReadyYes
    Differential Temperature1 to 10
    Digital-Non ProgrammableNo
    Display OptionsDigital
    Displays Outdoor TemperatureYes
    Dual Transformer CompatibleNo
    Electrical ConnectionTerminals
    Electrical Rating24 vac, 50/60 Hz, 3 va
    Energy Star RatedNo
    Fan SwitchingYes
    Heat Pump CompatibleYes
    Indoor Remote SensorYes
    Low Battery IndicatorNo
    Operating Temperature Range-4 to 158
    Power MethodWired
    Product FamilyNo Family
    Programmable FanYes
    Prop 65Yes
    Removable InterfaceNo
    Sensing ElementNo
    Stages Cool2
    Stages Heat2
    Switch ActionHEAT-OFF-COOL
    System SwitchingYes
    Temperature Range32 to 104
    Temperature Settings per Day4
    Terminal DesignationsY1, Y/Y2, O/W2/B W/W1
    Vacation ModeYes
    Voltage24 VAC
    Warranty OfferedYes

    Equipment Part List